Die Transfer Cart

If you need to handle and transport dies or molds between the pressroom and the die storage and maintenance area, a die transfer cart may be a perfect choice as it provides efficient, safe and smooth movement of heavy loads. It can be used to handle various materials, such as industrial pipes, coils, heavy equipment, structural steel and components. This material transfer cart can be powered by the rails, battery or cable reel depending on your load transport requirements.

Die Transfer Cart for Sale
Die Transfer Cart for Sale

Die transfer cart for sale parameters:

  • Load Capacity: 2t~150t
  • Table size: can be customized
  • Wheel base: 1200~7000mm
  • Rail inner gauge: 1200~2000mm
  • Battery voltage: 24~72V
  • Running speed: 0~30m/min
  • Control mode: button / remote control

Different Types of Die Transfer Carts for Your Reference

  • Rail powered transfer cart

Low-voltage rail powered transfer cart is a popular choice to handle dies and other materials and products. It is designed to transport loads weighing up to 150 tons and more. The rails are required to be insulated if you use this type of transfer car.

Low-voltage Rail Powered Transfer Cart
Low-voltage Rail Powered Transfer Cart

Low-voltage rail powered transfer cart parameters:

  • Load Capacity: 2t~150t
  • Table size: can be customized
  • Wheel base: 1200~7000mm
  • Rail inner gauge: 1200~2000mm
  • Running speed: 0~25m/min
  • Running distance: 50~80m
  • Control mode: button / remote control

  • Battery operated transfer car

Powered by the battery, the transport cart is ideal for die handling with excellent safety and maneuverability. It eliminates the needs for a cable reel or other external means to power the cart. The battery transfer cart provides steerable or controlled direction of motion. However, it requires limited time of use, and the battery needs to be maintained regularly.

Battery Powered Mold Transfer Cart
Battery Powered Mold Transfer Cart

Battery powered mold transfer cart parameters:

  • Load Capacity: 2t~150t
  • Table size: can be customized
  • Wheel base: 1200~7000mm
  • Rail inner gauge: 1200~2000mm
  • Battery voltage: 24~72V
  • Running speed: 0~30m/min
  • Control mode: button / remote control

  • Cable reel powered electric flat cart

The cable reel powered cart can be designed to travel on steel rails or directly on the floor of your workshop. Due to simple structure and relatively low cost, this type of die transfer cart commonly found in manufacturing facilities. It is ideal for any load capacity and high frequency of use.

Cable Drum Powered Die Handling Cart
Cable Drum Powered Die Handling Cart

Cable drum powered die handling cart parameters:

  • Load Capacity: 2t~150t
  • Table size: can be customized
  • Wheel base: 1200~7000mm
  • Rail inner gauge: 1200~2000mm
  • Running speed: 0~25m/min
  • Running distance: ≤200m
  • Control mode: button / remote control

Main Features:

  • Compact structure, large load capacity
  • Accurate positioning, high automated program
  • Simple operation, smooth turning
  • Long running distance, low noise
  • Easy maintenance, remote control

10 Ton Transfer Car for Dies
10 Ton Transfer Car for Dies

10 ton transfer car for dies and molds parameters:

  • Load Capacity: 2t~150t
  • Table size: can be customized
  • Wheel base: 1200~7000mm
  • Rail inner gauge: 1200~2000mm
  • Running speed: 0~25m/min
  • Running distance: 50~80m
  • Control mode: button / remote control

Optional Features And Components You May Need:

  • 2 tons to over 150 tons capacity
  • Trackless – the trackless cart is not limited by length and distance as compared to a track mounted cart. It can be designed with all wheel steering and small turning radius.
  • Deck fixtures – to accommodate the exact needs of clients as well as for simple transportation
  • Drive system – AC electric motor fed by a cable reel (with enclosed conductor bars or festoon system), DC electric motor powered by 24V or greater battery pack
  • Fully automated controls, a fixed pendant or wireless remote control
  • Bumper – to withstand impact from a variety of angles
  • Warning horns and marker lights
  • Rail sweeps
  • Collision avoidance system

25 Ton Transport Cart
25 Ton Transport Cart

25 ton transport cart parameters:

  • Load Capacity: 2t~150t
  • Table size: can be customized
  • Wheel base: 1200~7000mm
  • Rail inner gauge: 1200~2000mm
  • Battery voltage: 24~72V
  • Running speed: 0~30m/min
  • Control mode: button / remote control

What to Look for When Selecting A Die Handling Cart

There are a few basic information you need to address in order to identify the right type of equipment for the job at hand:

  • Your desired electric transfer cart specifications, such as rated load capacity, table size, running speed, running length and wheel base.
  • What will power the cart? The rail, battery, or cable reel?
  • The type and size of the material to be handled
  • Track or trackless?
  • The control mode you need
  • Other special requirements

You can tell us your specific requirements by filling out the contact form or giving us a call. Our well-experienced engineers and sales team will get together to design the most economical and productive solution for your application.

Transfer Cart Controls

The die handling cart can be designed with fully automated controls, pendant control or wireless remote control. With easy-to-operate user interface system, it can simplify control during load transportation and improve operational efficiency.

During load movement, the operator walks along with cart using a button pendant or stands freely within the work area using a wireless remote control. The selection of flat cart control is determined by several factors, such as user’s preference and financial reasons.

Trackless Industrial Transfer Cart
Trackless Industrial Transfer Cart

Die And Mold Transport Cart Parts

  • Frame – it adopts box beam structure that can be designed with large load capacity and multiple deck configurations. It is not easy to deform.
  • AC or DC motor – depending on the power source used
  • There-in-one reducer – European standard there in one reducer provides stable operation, mechanical transmission efficiency, low noise, easy installation and maintenance.
  • Cast steel wheel – the material is ZG55. It can be installed or replaced easily.
  • Electrical control box – it can be delivered with a variety of safety equipment to make the operation much safer, such as emergency stop switch, power source switch and alternation switch. The cart controls can be designed with full automation, attached pendant or wireless remote control.
  • Safety equipment – different styles of safety equipment are available as optional , such as warning horns, marker lights, bumper, automatic stop device and anti-collision device.

Material Transfer Cart Service

With 8 service networks and over 60 after-sales service engineers for overseas market, we are able to provide a complete after-sales service for our clients, such as the equipment installation, commissioning, maintenance, staff training or instruction and free technical advice. Our products have been exported to many countries and regions around the world like Pakistan, Russia, Uzbekistan, Philippines, Indonesia and Kazakhstan.

If you have any questions, you can call the after-sales service center. Our service is available at 7*24hours every week.

Cost-effective Mold & Die Transfer Cart for Sale

The electric transfer cart is developed to minimize the uses of cranes and forklifts while streamlining workflow, improving work safety and efficiency of material handing. It can be designed to move the entire length of the facility. The equipment is available in a number of configurations and features to suit varied needs of our customers.

We focus on optimizing material handling in a variety of fields and sectors. Our products range from overhead cranes, gantry cranes, jib cranes, to hoists, winches and transfer carts. With extensive experience and expertise, we provide a full service to suit each individual customer. We will develop the most productive and cost effective equipment to help increase your return on investment.

Interested in die transfer cart? Please fill out the contact form or send us an email to tell us what you need.

Technical Parameters of Die Transfer Cart

KPD Series:

Model

KPD-2T KPD-5T KPD-10T KPD-20T KPD-30T KPD-40T KPD-50T KPD-63T KPD-100T KPD-150T
Rated load (T) 2 5 10 20 30 40 50 63 100 150
Table size length(L) 2000 3500 3600 4000 4500 5000 5500 5600 6500 10000
Width(W) 1500 2000 2000 2200 2200 2500 2500 2500 2800 3000
Height(H) 450 450 500 550 600 650 650 750 850 1200
Wheel Base (mm) 1200 2500 2600 2800 3200 3800 4200 4300 4900 7000
Rail Inner Gauge (mm) 1200 1435 1435 1435 1435 1435 1435 1435 2000 2000
Wheel Diameter(mm) Φ270 Φ300 Φ300 Φ350 Φ400 Φ500 Φ500 Φ600 Φ600 Φ600
Wheel Quantity(Nos) 4 4 4 4 4 4 4 4 4 8
Ground Clearance (mm) 50 50 50 50 50 50 50 75 75 75
Running speed (m/min) 0-25 0-25 0-25 0-20 0-20 0-20 0-20 0-20 0-20 0-18
Motor Power (Kw) 1 1.2 1.6 2.2 3.5 4 5 6.3 11 15
Transformer Power (KVA) 3 5 5 6.8 10 10 10 20 30 30
Transformer Quantity (Pcs) 1 1 1 1 1 1 1 1 1 1
Running Distance (m) 80 80 80 80 80 60 50 50 50 50
Max Wheel Load (KN) 14.4 25.8 42.6 77.7 110.4 142.8 174 221.4 343.8 265.3
Reference Weight (T) 2.8 3.6 4.2 5.9 6.8 7.6 8 10.8 14.6 26.8
Recommended Rail Model P15 P18 P18 P24 P38 P43 P43 P50 QU100 QU100

KPX Series:

Model

KPX-2T KPX-5T KPX-10T KPX-20T KPX-30T KPX-50T KPX-100T KPX-150T
Rated load (T) 2 5 10 20 30 50 100 150
Table size(mm) length 2000 3500 3600 4000 4500 5500 6500 10000
Width 1500 2000 2000 2200 2200 2500 2800 3000
Height 450 500 500 550 600 650 900 1200
Wheel Base (mm) 1200 2500 2600 2800 3200 4200 4900 7000
Rail Inner Gauge (mm) 1200 1435 1435 1435 1435 1435 2000 2000
Wheel Diameter(mm) Φ280 Φ300 Φ300 Φ350 Φ400 Φ500 Φ600 Φ600
Wheel Quantity(Nos) 4 4 4 4 4 4 4 8
Ground Clearance (mm) 50 50 50 50 50 50 75 75
Motor Power (Kw) 1 1.2 1.6 2.2 3.5 5 10 15
Battery Capacity (Ah) 180 180 160 180 250 330 440 600
Battery Voltage (V) 24 36 48 48 48 48 72 72
Running speed (m/min) 0-30 0-30 0-25 0-25 0-25 0-20 0-20 0-18
Running Time When Full Load(Hours) 4.32 5.4 4.8 4 3.5 3.3 3.2 3.2
Running Distance for One Charge(Km) 6.5 8.1 7.2 4.8 4.2 4 3.8 3.2
Max Wheel Load (KN) 14.4 25.8 42.6 77.7 110.4 174 343.8 265.2
Reference Weight (t) 2.8 3.6 4.2 5.9 6.8 8 14.5 26.8
Recommended Rail Model P15 P18 P18 P24 P38 P43 QU100 QU100

KPJ Series:

Model KPJ-2T KPJ-10T KPJ-20T KPJ-30T KPJ-50T KPJ-63T KPJ-150T
Rated load (T) 2 10 20 30 50 63 150
Table size(mm) length(L) 2000 3600 4000 4500 5500 5600 10000
Width(W) 1500 2000 2200 2200 2500 2500 3000
Height(H) 500 550 600 650 700 800 1200
Wheel Diameter(mm) Φ270 Φ300 Φ350 Φ400 Φ500 Φ600 Φ600
Wheel Quantity 4 4 4 4 4 4 8
Running speed (min) 0-25 0-25 0-20 0-20 0-20 0-20 0-18
Motor Power (Kw) 0.8 1.5 2.5 4 5.5 7.5 15
Max Wheel Load (KN) 14.4 42.6 77.7 110.4 174 221.4 265.2
Recommended Rail Model P15 P18 P24 P38 P43 P50 QU100

BMP Series Trackless Transfer Car:

Model

BWP-2T BWP-10T BWP-20T BWP-30T BWP-50T BWP-80T BWP-100T
Rated load (T) 2 10 20 30 50 80 100
Table size length(L) 2000 2300 2400 3500 5500 6500 6600
Width(W) 1500 2000 2200 2200 2600 2800 3000
Height(H) 450 500 600 700 800 950 1200
Wheel Base (mm) 1080 1650 2800 1650 2000 1950 2000
Axle Base (mm) 1380 1850 1435 2700 2850 3500 4000
Wheel Diameter(mm) Φ250 Φ400 Φ350 Φ450 Φ600 Φ600 Φ600
Wheel Quantity(Nos) 4 4 4 4 4 4 8
Ground Clearance (mm) 50 50 50 50 50 75 75
Running speed (m/min) 0-25 0-25 0-20 0-20 0-20 0-20 0-18
Motor Power (Kw) 2*1.2 2*2.2 2*4.5 2*5.5 2*7.5 30 40
Battery Capacity(Ah) 250 250 400 450 500 800 1000
Battery Voltage(V) 24 48 48 48 72 72 72
Running Time When Full Load 2.5 2.8 2.2 2 2.5 2 1.9
Running Distance for one Charge(Km) 3 3.4 2.7 2.4 3 2.4 2.3
Max Wheel Load (KN) 14.4 42.6 77.7 110.4 174 185 190
Reference Weight (t) 2.3 4.2 5.9 6.8 8 14.6 26.8

Please feel free to give your inquiry in the form below.
Your Model:

Your Name(required):

Your Email(required):

Your Tel:

Your Country:

Your Company:

Your Message(required):