30 Ton Electric Winch

30 ton electric winch is suitable for construction and installation work to lift or pull various materials. It is efficient and safe winch equipment wound with wire rope on the drum to lift and pull heavy loads vertically, horizontally or obliquely. We offer extensive range of electric winches, available with various options and features to make sure you end up with the best winch system for your application.

Models of 30 Ton Electric Winch for Sale

AQ-JM slow speed electric winch: offers slow speed operation and accurate positioning. It is a sort of gear reducer driven winch, suitable for various construction and installation work.

30 ton slow speed electric winch parameters:

• Loading capacity: 0.5~200 t
• Rope capacity: 20~3600 m
• Working speed: 5~20 m/min;(single speed and dual speed)
• Power supply: 220-690V, 50/60HZ, 3Phase

Get A Free Quote

Get In Touch

Our teams are on hand to provide you with the right lifting solutions.

FEW TIPS

1.What will the winch be used for: ?

2.Rated load(T) or pull force(KN): ?

3.Drum capacity(mm x m): ?

4.3 phase power supply(v/hz): ?

5.Working speed(m/min): ?

6.Your project introduction: project working site, project budget, etc.

AQ-JK high speed electric winch: offers more efficient winch operation and reduced power consumption. High speed winch is mainly used for lifting heavy materials in civil engineering construction and small equipment installations.

Fast speed electric winch parameters:

• Loading capacity: 0.5~60 t
• Rope capacity: 20~500 m
• Working speed: 20~35 m/min; (single speed and dual speed)
• Power supply: 220-690V, 50/60HZ, 3Phase

Get A Free Quote

Get In Touch

Our teams are on hand to provide you with the right lifting solutions.

FEW TIPS

1.What will the winch be used for: ?

2.Rated load(T) or pull force(KN): ?

3.Drum capacity(mm x m): ?

4.3 phase power supply(v/hz): ?

5.Working speed(m/min): ?

6.Your project introduction: project working site, project budget, etc.

AQ-JMM friction type electric winch: consists of two friction drums and a wire storage drum. This type of winch offers constant wire rope speed and stable lifting, ideal for lifting and pulling various large and extra-large concrete, steel structures and steel cables. Friction winch is commonly found in road and bridge construction, the installation of large-scale factories and power engineering equipment.

30 ton friction winch parameters:

• Loading capacity: 0.5~100 t
• Rope capacity: 20~5000 m
• Working speed: 5~20 m/min
• Power supply: 220-690V, 50/60HZ, 3Phase

Get A Free Quote

Get In Touch

Our teams are on hand to provide you with the right lifting solutions.

FEW TIPS

1.What will the winch be used for: ?

2.Rated load(T) or pull force(KN): ?

3.Drum capacity(mm x m): ?

4.3 phase power supply(v/hz): ?

5.Working speed(m/min): ?

6.Your project introduction: project working site, project budget, etc.

Selection Guide of A 30 Ton Electric Winch

If you are looking for a 30 ton electric winch, consider the following things, which is helpful for identifying the right winch equipment for the job:

• Determine the basic parameters of the winch, including the rated load or pulling force, working speed and drum capacity.
• Determine the uses of the winch, such as lifting, pulling, or used on boats for anchoring, mooring or towing purposes.
• Determine the power source: electric, hydraulic or diesel engine
• Winch working environment
• Other winch options you may need, such as rope spooling device, grooved drum, drum guard, load limiter, limit switches, band brake, clutches, etc.

If you are unsure as to which type of electric winch is right for you, contact us online and discuss your winch requirements with one of our professionals. We will be more than happy to help you select the right one for your application.

Structure of Electric Winch

Electric winch is composed of a machine base, a worm gear reducer, a transmission gear, a drum, a brake and electrical device. All the parts are installed on the machine base. Through the elastic coupling, the motor drives the drum to rotate and wind the steel wire rope in and out through the worm gear reducer and the first stage open column spur gear.

The winch machine adopts hydraulic brake, which can brake automatically. All electrical components are installed in the electrical box. All the movement of the machine are controlled by the handwheel of a reversible drum controller, which is very simple and convenient to operate.

Technical Parameters of 30 Ton Electric Winch

Operation and Precautions of Electric Winches

1. Check the weight of the heavy objects before work, which will be within the range specified by the winch performance. Check the wire rope, and fill the gearbox with oil.
2. Check the fixing of the machine and the firmness of the connections of all parts, and check the correctness of the electrical wiring and grounding.
3. To prevent the tension of the wire rope from slackening when dropping heavy objects, the wire rope wound on the drum should be no less than three turns.
4. Refuel or change oil regularly as required. The machine should idle for 3-5 minutes before work.
5. The sensitivity of the brake can be adjusted according to the method specified in the brake manual.
6. In an emergency, you can press the stop button switch to disconnect the AC contactor, so that the motor and other electrical device are cut off immediately.