10 ton overhead crane is a popular and cost-effective lifting equipment used in a variety of fields and sectors, such as manufacturing, mining, chemical industry and steel mills. The overhead crane 10 ton comes in four main configurations, including single girder, double girder, top running and underhung system. Our overhead cranes can also be custom designed and constructed to suit your special lifting requirements.
Types of 10 Ton Overhead Cranes For Sale
The types of 10t overhead cranes we supply include general-purpose single girder and double girder overhead cranes. In addition, we also provide 10-ton electromagnetic overhead crane, grab overhead crane, explosion proof overhead crane, steel mill overhead crane, etc. to meet customers’ specific applications.
Single Girder 10 Tonne Overhead Cranes: AQ-LD, AQ-HD, AQ-LX
The general-purpose single girder 10 ton crane is available in a number of different models and sizes to suit varied needs of customers, mainly including AQ-LD single girder overhead travelling crane, AQ-HD European standard bridge crane, AQ-LX single girder underhung crane. Below are the the single girder 10 ton overhead crane specifications for your reference:
|Load capacity||10 ton|
|Hoist running speed||20(30)m/min|
|Crane running speed||20(30)m/min|
|Work duty||A3, A4|
|Load capacity||10 ton|
|Hoist running speed||2-20m/min|
|Crane running speed||3-30m/min|
|Hoist running speed||20m/min|
|Crane running speed||20m/min|
|Work duty||A3, A4|
Double Girder 10 Ton Overhead Cranes: AQ-QD, AQ-LH, AQ-NLH, AQ-QDX
The general-purpose double girder 10 ton overhead bridge crane is more efficient and durable than a single girder crane. It can be utilized for the most demanding tasks. In order to suit your specific needs, we offer a variety of double girder overhead cranes, such as AQ-QD hook overhead crane, AQ-LH hoist overhead crane, AQ-NLH European standard overhead crane, AQ-QDX European-style double girder bridge crane, etc.
|Load capacity||10 ton|
|Trolley running speed||37.4m/min|
|Crane running speed||70.6m/min|
|Load capacity||10 ton|
|Trolley running speed||20(30)m/min|
|Crane running speed||20(43)m/min|
|Work duty||A3, A4|
|Load capacity||10 ton|
|Trolley running speed||2-20m/min|
|Crane running speed||3-30m/min|
|Load capacity||10 ton|
|Trolley running speed||2.4-33m/min|
|Crane running speed||4.2-68m/min|
Other 10T Overhead Crane Types
To meet your specific lifting needs, we also offer purpose-built 10-ton overhead cranes, such as explosion proof overhead cranes, grab cranes, magnetic overhead cranes, steel mill overhead cranes, etc.
Customer Projects And Cases
We have partnered with numerous clients around the world to provide the best possible overhead crane solutions for their projects and businesses. We also look forward to cooperating with more customers around the world! Here you can get a brief overview of some of our 10 ton overhead crane cases.
Installation of 10 Ton Overhead Cranes in Uzbekistan
We have cooperated with many Uzbekistan customers and provided different types of 10 ton overhead cranes for different industries. Many of these customers are very satisfied with our product quality and service, and continue to return orders to us.
AQ-HD 10 Tons Overhead Crane Installation in Nigeria
An AQ-HD 10 ton overhead crane was installed in Nigeria. Aicrane well-experienced after-sales service engineers went to the site to help the customer install and debug the equipment in Nigeria. With our professional after-sales service, the Nigeria European overhead crane can be put into use quickly and run smoothly.
Test Run Video of AQ-LD 10 Ton Crane in Russia
Here is a test run video of an AQ-LD 10 ton bridge crane in Russia. It has been installed and is undergoing a test run to make sure it works properly.
Working Video of AQ-QDX 10 Ton Overhead Crane in Kazakhstan
The video below is about the working of an AQ-QDX 10 ton overhead crane in Kazakhstan. The overhead crane is used to lift and move steel coils in the customer’s warehouse. According to customer feedback, the crane works great!
What Our Customers Say
The crane and the structure look amazing and have the correct dimension according to drawing accepted. We believe that with this quality we can continue working with your brand.
Everything is going well. Very appreciated your cooperated. You are very supportive and great supplier I know. May your company in good condition always. Hope we can keep in touch always.
Your overhead cranes are affordable, and make the lifting process very easy and efficient. I am very satisfied with your products and hope we can cooperate for a long time.
10 Ton Top Running VS. Under Running Crane, Which One Fits Your Facility?
Before deciding whether a top running or a under running bridge crane 10 ton fits your factility, you should have a brief understanding of the differences and advantages of the two cranes.
Top Running Overhead Crane
Top running crane is the most commonly used overhead crane system in workshops, warehouses, workstations and storage yards. As the name implies, the top running crane is mounted on top of the runway beam, thus it delivers greater strength, higher efficiency and greater durability than an underhung overhead crane.
Advantages of Top Running Overhead Crane:
- Designed to lift massive loads, usually with a capacity up to 500 tons.
- Provide the largest overhead space for your facilities.
- Easier installation and maintenance, and less time-consuming than an under running crane.
- Suitable for various facility conditions.
Underslung crane travels at the bottom flange of the runway beam which is suspended from the ceiling height of your facility. This form of under running crane is ideal for occasions where the building height is not sufficient. In addition, it can save the steel structure construction.
Advantages of Underhung Crane:
- Capacity up to 10 tons
- Usually lighter than a top-running system, thus reducing equipment costs and reduce design requirements for buildings or supporting structures.
- Ease of use and flexibility
- Maximize your facility’s floor space for production and storage of material
Major Factors to Consider When Selecting A Crane
The selection of a top running or a under running 10 ton overhead crane is determined by several factors:
– The capacity of loads you’ll be lifting
– Lifting height you require
– Are there existing runways in your facility?
– Can existing support structures be used or new ones will be built?
Before you make your final decision, you need to discuss your 10 ton overhead crane specifications and business needs with one of our experts to ensure every crane detail for the right lifting solution!
How Much Does A 10 Ton Overhead Crane Cost?
The 10 ton overhead crane cost can vary widely in terms of the crane configurations, design and other special options. Therefore, without knowing your actual needs, we are unable to provide an accurate price of a 10 ton overhead crane.
You need to provide other specifications of the 10-ton bridge crane, working environment, type of material to be lifted, duty cycle, your destination, etc. so that the crane manufacturer can provide you with an accurate quote.
Here are a few questions you need to answer when talking with a 10 ton overhead crane manufacturer:
– Load capacity: ton?
– Span of the crane: m?
– Max. lifting height of the crane: m
– Traveling length: m? Do you need us to provide the rail for you?
– How many hours will the crane work per day? How many times per hour?
– Electric Power supply: 3 phase 380V 50Hz?
– What kind of material will the crane lift?
After getting your reply, our professional engineers will provide you with the right design solution and the10 ton eot crane price!
10 Ton Overhead Crane Structure
Overhead bridge crane is a simple piece of machinery used for lifting and moving heavy loads from one location to another. It is mainly composed of main beam, end beams, hoisting mechanism, crane travelling mechanism, control system and electrical equipment. Different components can be engineered to improve the crane capacity and performance.
Since the overhead crane parts and components greatly affect its performance and durability, it is indeed important to select a crane with the right configurations and features. Here you can have a simple understanding of the main components of the overhead travelling crane.
Bridge – it is the unit incorporating one or two main beams and end beams. It is a load-bearing member of the crane and spans the width of the building.
Hoist – it is used to raise and lower the load using wire rope or chain. The overhead crane hoist is generally powered with electricity.
Trolley – it is the unit onto which the hoist is mounted.
Crane travelling mechanism – the crane can run on the top of the runway beam or on the bottom flange of the beam.
Lifting attachment – the lifted load can be supported using a hook which is connected to the hoist. To handle different types of materials, we offer grab bucket, electromagnetic chuck, carries beam and so on.
Controls – the crane controls are available with pendant control, wireless remote control and cabin control.
Electrical equipment – insulated conductor bars or festoon systems bring the power to the crane.
How to Install A 10 Ton Overhead Crane?
How do you install overhead cranes? This is a concern of many customers. In general, we offer our clients different options for them to choose from:
First, if the customer requests, we can send a professional installation team to the site for installation guidance.
Second, customers can install by themselves. We provide 3D installation videos, instruction manuals, 24-hour online installation instructions, detailed electrical drawings, etc. This way is less expensive.
3D Installation Video of Overhead Crane
Example of Overhead Crane Installation
Here is an example of an overhead crane installation guided by the Aicrane service team. One of our Bangladeshi customers wants to install a single girder overhead crane in his workshop. According to the customer’s request, we send after-sales service engineers to the site to assist the customer in the installation.
Tips for Overhead Crane Installation
Technical Requirements For The Installation Of Crane Track
- The rail joint can be made straight or 45 degrees. The inclined joint can make the large wheel smooth transition at the joint. The gap of the normal joint is 1~2mm.
- When the temperature in the cold area is below 20 degrees Celsius in winter, the temperature gap should be considered. When the length of a single rail is about 10m, it is desirable to 4~6mm (including normal gap).
- The lateral dislocation and height difference of the two track at the joint should be less than or equal to 1mm.
- On the same section, the surface of the rail is high and low: to a bridge crane. It shall not exceed 10mm at the post, not exceed 15mm at other locations, and 10mm for gantry cranes, and no more than gantry cranes and loading cranes with a span greater than 40m.
- On the same side, the elevation between the elevation and the adjacent column between the two columns is not more than 15mm, but the maximum is not more than 15mm.The errors of the track span, the center of the track and the center of the rail bearing and the straight track are not straight.
Installation Considerations Of Overhead Cranes
- Reliability of crane track
When a crane or a trolley runs the break, it produces longitudinal or lateral forces. If the large and small car brake at the same time, it produces a synthetic braking force, so that the track is subjected to an oblique thrust.
When the track is mounted on one side generally higher than the other side, the crane moves to the lower side, thereby increasing the lateral force of the track.
To this end, effective measures should be taken to secure the track in a reliable way. Especially for outdoor gantry cranes, in order to avoid wind blowing and rollover, in the nonworking state, the rail clamping device is clamped on the track, so the reliability of such track laying is more important.
- Easy to replace
In addition to reliability, the installation of the track must be considered to be easy to replace. In particular, the place of continuous production cannot be ignored. To this end, it is suggested that no permanent connection, such as riveting or welding, is used.
- Type of rail beams
There are two kinds of rail beam used to install track, one is steel structure beam and the other is a concrete precast beam. Prefabricated concrete beams must be retained for the installation of anchor bolts.
For more overhead crane installation services, please feel free to contact us!
We provide complete after-sales service to ensure the safe, stable and reliable operation of each crane, and provide the most reliable solution for the user’s safe lifting and work efficiency.
- We send after-sales service engineers to the customer site to guide the installation and commissioning of the crane.
- After the crane is handed over and accepted, we will have regular return visits.
- We provide users with operation, maintenance and repair training.
- Timely supply of spare parts.
- We provide timely technical support and technical consulting services.
- We have overseas offices in the Philippines, Malaysia, Indonesia, Pakistan, Uzbekistan and other countries in order to provide fast service.
- We provide life-long service support.
Currently we have overseas offices in Pakistan, Uzbekistan, Malaysia, Indonesia and the Philippines.
The payment methods we can accept are T/T, L/C, Western Union, etc. We accept credit card payment, and our Paypal account supports credit card payment.
In addition we can make the deal through Alibaba trade assurance that supports credit card payment.
The delivery time of the overhead cranes is generally 20~40 days. If special customization is required, the delivery time will be longer.
For single girder 10 ton overhead crane, the common control method is control handle + remote control, and the two can also be used separately.
For double girder 10-ton overhead crane, the commonly used control methods are control handle + remote control, cab operation + remote control, and each method can also be used separately.
In addition to overhead crane capacity, a 10 ton overhead crane weight depends on other factors, such as span.
For instance, the dead weight of a 10 ton overhead crane with a span of 22.5m is about 5 tons.
If you want to know the weight of an overhead crane, please contact our crane experts and let us know the specifications of your crane, and we will help you calculate the weight of the crane.
During the operation of overhead cranes, due to various loads, certain parts and metal structures of the cranes will inevitably be worn or deformed. When these wear reach a certain level, it will seriously affect or lose the original technical performance of the whole machine, endangering the safety of crane operation. Therefore, the worn out parts and deformed metal structures must be replaced and repaired.
- Hook And Pulley
The hook fixing place must be reliable, and the nut must not be loose.
The worn area of the hook shall not be repaired by surfacing welding.
The uneven wear of the pulley rope groove can be reprocessed on the lathe.
When the rim of cast steel pulley is defective, repair welding can be carried out.
The lubricating nipple of the pulley must be kept clean to ensure that the oil passage is unblocked.
- Wire Rope Drum
When the rope groove is worn, the wall thickness of the cylinder can be appropriately reduced (usually about 10%-15%), and a new rope groove can be processed on the lathe. In order to ensure safety, check calculations should be carried out before machining to determine the amount of turning work.
For the defects on the surface of the cast steel and steel plate assembly welding drum, the welding repair method should be determined according to the location and size.
After the keyway is damaged, it can be repaired by welding first, and then processed and repaired.
If the fixing bolt holes of the gear ring on the end plate of the drum are worn out, the holes can be re-reamed.
If the wear of the rim does not exceed 40% of the original thickness, and the rolling surface defect is not too large, it can be repaired by welding.
The defects of the cast steel running wheel rim can be repaired by welding and repairing, or all the rims can be cut off, and a sleeve of the same size can be fitted on the outer ring by press-fitting. After fixing, process rims that match the design dimensions.
Defects such as pits and sand holes on the rolling surface of the traveling wheel that are not large in area and depth can be repaired by welding.
Cracks in the wheel hub and spokes of the running wheel can be repaired, but cracks on the rim cannot be repaired.
The shaft deflection can be straightened. If the deflection does not exceed 0.8% of the total length, it can be straightened by cold work. If the deflection exceeds 0.8% of the total length, it must be heated and straightened.
Shoulder wear can be repaired by welding or spraying and processing.
Damaged keyways can be repaired by hand or milling.
- Rolling Bearings
Most of the rolling bearings should be replaced during overhaul and medium repair.
Those minor parts that have no defects after careful inspection can continue to be used.
Rolling bearings with rusty steel balls and isolation rings, wear and fatigue erosion on the raceway surface, wear and scratch marks on the steel balls and steel columns, damage to the isolation ring, and cracks in the inner and outer shells must be replaced.
Common defects are wear of brake wheels, wear of brake bands or brake pads, enlargement of pin reaming holes of lever system, wear of pins, deformation of force transmission levers and wear of fasteners.
The repaired and assembled brake must ensure that the levers of the lever system can move relative to each other, balanced and stable, without jamming; the brake band and the brake shoe are closely fitted, and the size meets the requirements; when the brake is released, the gap between the brake wheel and the brake band shall not be less than 0.25mm.
Common defects of elastic pin couplings are rim wear, elastic rubber ring wear, pin shaft bending and scratches, half coupling body cracks, hub pin shaft hole deformation, keyway damage, etc.
- Gear Transmission
Common defects of gear transmission include wear of meshing gear pairs, broken teeth, wear of hub holes and keyways, cracks of ring gear and spokes, and cracks in the reducer body.
Contact Us for A 10 Ton Overhead Crane Solution!
Engaged in overhead crane industry for many years, we always offer our customers the most suitable crane solution that provides proper balance between cost, efficiency, durability and suitability. Each of our 10 ton bridge crane for sale is ruggedly constructed to delivers long service life. We not only offer overhead crane design, fabrication, but provide delivery, installation and maintenance services. To get the latest 10 ton overhead crane price and solution, you can fill out the contact form below or email us!