Workshop hook double girder overhead crane

An efficient work results from a sensible choice in the manufacturing equipment. Crane equipment plays a core role in the work of your workshop. So, in your workshop, you need to select a most appropriate workshop double girder overhead crane to ensure a higher work efficiency. Ellsen with almost two decade years in the crane industry will always stand by our customers’ side and recommend you the best dedicated cranes to optimize your work efficiency.

Ellsen QD Double Girder Overhead Crane with Hook for Sale
Ellsen QD Double Girder Overhead Crane with Hook for Sale

What are the features of the new generation workshop hook double girder overhead crane?

The workshop hook double girder overhead crane is a new generation of lifting equipment with the following advantages:

  • It is light in weight, and the pressure of its wheel is small, and its limited seize is also small, reliable performance, easy operation, it is the preferred model for a variety of materials handling.
  • The workshop overhead crane with the above advantages, can reduce the plant and other pre-project investment, while lighting, heating and other facilities can save some costs.
  • Product performance is reliable, durable, so that the product in the late use of the additional costs required to be the lowest:
  • On the one hand, the high performance of the crane reduces the maintenance; on the other hand, its total installed power (energy consumption) has been reduced, which also save the using costs.

 

Leading technology and design for the workshop hook double girder overhead crane

It is in strict accordance with the FEM / DIN standard design and manufacturing.

  • Optimized Height

Crane machine height is lower than traditional cranes by 20% -25%.

  • Much More Lighter Dead Weight 

Dead Weight loss by 20% -30%.

  • The Wheel Pressure

Maximum wheel pressure has been reduced by 15% -20%.

  • Seize

Limit size is small, which increases the crane operating area.

  • Structure

Lightweight structure to reduce plant construction costs

  • Modular design

The workshop hook double girder overhead crane parts are designed as a series of standard modules to form a rich product portfolio.

Between the modules using a removable connection to facilitate the installation and transportation.

Standardized module production ensures product quality stability and shortens the lead times.

QD Double Girder Overhead Crane with Hook for Sale
QD Double Girder Overhead Crane with Hook for Sale

Advanced manufacturing process

  • Steel Plate

Steel plate shot blasting pretreatment, surface quality meets the Sa2.5 level.

  • Sternum

The Sternum is cut by the cutting of the whole Sternum to ensure the smoothness and accuracy of the crown curve.

  • Weld Bead

The main weld bead uses submerged arc welding, ultrasonic, X-ray nondestructive testing.

The small frame of the bridge adopts the whole process of floor boring machine to ensure the flatness of the working plane.

  • Supreme Security
  • Overload limiter monitoring system

The safety monitoring system is equipped with an overload limiter and displays the load resin in real time on the display screen, prompting the operator to prevent overload.

  • Automatic inspection system

Before the start of the controller will be self-test, including the power supply voltage level, the lack of relevant safety protection device and the button zero status.

  • Imported Steel Wire Rope from German

The crane uses Germany imported steel wire rope, breaking force is not less than 2160 N / mm2, and the safety factor is not less than 5.

Diagram of the Workshop Hook Double Girder Overhead Crane
Diagram of the Workshop Hook Double Girder Overhead Crane

  • Extreme Reliability

Germany imported gear motor, hard tooth surface gear, improve the carrying capacity; shell sealing is good, to ensure that no oil leakage.

  • Electrical components

The main electrical components used Schneider, Siemens, and other well-known international brands, electronic control box protection rating is not less than IP54.

  • Wheel

Wheel is forged by Mn alloy steel. Wear resistance is better, anti-fatigue, and has a long service life. (According to customer needs, it can also choose domestic configuration.)

  • Low energy consumption and maintenance-free.
  • Germany Imported Electrical Motor

 

The crane’s total installed power is about 20% lower than that of conventional cranes.

  • Integrated drive structure

Using multi-integrated transmission mechanism, the middle part of the small, high transmission efficiency.

  • Maintenance-free

“Maintenance-free + easy maintenance” design concept, reduce customer maintenance costs.

  • Import parts

The new standard workshop hook double girder overhead crane adopts advanced processing technology and high quality imported parts, the failure rate is much lower than the traditional international crane to help customers effectively reduce operating costs. (According to customer needs to choose domestic configuration)

QD 550t Double Girder Overhead Crane with Hook
QD 550t Double Girder Overhead Crane with Hook

  • Integrated Intelligence 

Crane safety monitoring system

Install the “black box” for the crane to record every run of the crane.

  • Crane Electrical Anti – Swing Technology

To achieve the precise positioning of the crane

Advanced electrical control technology

To achieve the semi-automatic automatic control of the crane, the crane into a “crane robot.”

Gald you to come contact with us for more detailed information

In order to send correct and most suitable steel mill cranes quotation, pls kindly offer some important info as below. We will reply you in 12 hours.

* Your Name
* Your Email

Your Country
Your Phone Number (Include the area code)

* Basic Info

* Your Additional Requirement